Rev L brief

Rajesh received the original GMADA-approved GF+FF on 1 September 2026. Rasters live at ref-gmada/sheet-2.png (GF) and sheet-1.png (FF); PDF gmada-approved.pdf. The independent 4 × 5 overlay was punching columns through rooms. Instruction: do not justify in-room columns. GMADA puts walls first, with columns at corners and T-junctions. Rev L realigns the frame onto those walls, keeps the locked double-height porch and parking / A5, and absorbs leftover slivers into usable rooms rather than wasted 2′ strips.

GMADA is the architectural base; adjustments are allowed. Rajesh has now authorized room width, depth and length adjustments where required. That work is Rev M, running on this same house. The numbers on this page are the Rev L plate — a coordination snapshot, not a freeze of every room.

Origin is the north-west corner of the plot. X east, Y south. Feet-inches. Plot 50′-0″ × 90′-0″ (500 sq yd). South is the street. Pin 30.789774 N, 76.746534 E. GMADA New Chandigarh / DLF Mullanpur, Sector 3.

Setbacks locked 29 August 2026: front / south 15′-0″, rear / north 12′-0″, envelope 41′-0″ wide × 63′-0″ long (outer faces 4′-0″ to 45′-0″, north face on the 12′ line, south house face at 75′-0″). West stair is a dog-leg (E–W flights, west landing, clockwise up; GF start SE of well westbound then eastbound to gallery; same FF to roof). Mandir is north-east. Atrium / open court is open to the sky. South-west gate 1′-6″ from south and west, 12′ vehicular leaf + 3′-6″ pedestrian leaf.

Thirty-five kept, all on wall T-junctions or corners. None in a room interior, none in parking. B5 is omitted (listed last). Jog kept: K5 at 75′-8″, D6 at 75′-0″ (8″). F3–J1 is 10″ — keep both; they are wall T’s, not a double post.

From _arch_part1.py. These are the current plate, not a 4 × 5 overlay. Rev M may slide interior centres when rooms grow back; envelope, A5, porch jambs and AAC do not move.

Leftovers on the Rev L plate were absorbed into usable rooms, not wasted 2′ strips. Three rooms are flagged: they are not frozen at the squeeze. Rajesh authorized width / depth / length adjustments. Rev M cannot fit GMADA 13′-0″ drawing with a 10′ foyer, 11′ kitchen and the parking cut inside the locked 41′ envelope. Target is a true 12′-0″ × 17′-3″ drawing, kitchen ≥ 10′-0″ E–W, foyer 10′-0″ held. Lounge toward 12′-4½″ from leftover only. Dining may give leftover back.

First floor is recut to the same wall centres. GMADA FF sheet is the graphic base. Room-by-room vs-GMADA figures are not in source — omitted, not invented. Clear sizes from FF_ROOMS in _arch_part1.py.

Longest house span D3–D4 = 20′-7″ N–S on the east dining wall — a wall beam, not a transfer. That is 2′-10″ over the old 17′-9″ 4 × 5 bay. Next: K1–K3 and D4–D5 at 16′-0″, then four at 15′-10″ (A1–A2, B1–B2, L1–L2, M1–M3). Void V1–E2 is 9′-2″ × 15′-3″. Porch 8′-0″ / jambs 14′-8″ double height. A5–F2 is 6′-10″ on the cut wall, north of parking. Sizes still HOLD; SE sizes the 20′-7″. No SBC.

Not two bays side by side. One tandem bay, no posts. West boundary to foyer at the cut = 11′-2″ (X 0 to 11′-2″). Street frontage to PJ1 = 12′-0″ in X. Depth 15′-0″ south setback plus the cut to 61′-4″ = 28′-8″ total from the street. Granite 1′-6″ below porch FFL. West balcony is a cantilever over this court. No beam over parking.

Live 2D (Rev L plate): E-01 / E-02 drawings/01-site-and-ground-floor-rev-e.html, first floor drawings/02-first-floor-and-roof.html, A-S01 drawings/12-structure-setout.html. Source of truth: _arch_part1.py, _arch_cad_plans.py, _arch_se_setout.py. Site: 208b.stellarchd.com.

3D is not recut to Rev L. It still shows the older parking-fix / regular-grid massing. Do not claim 3D matches this plate.

Next: Rev M recut is running — drawing to ~12′-0″ × 17′-3″, kitchen ≥ 10′ E–W, foyer 10′ held. Wait for the updated XY if you are about to move walls. Then 3D recut. The new centres are not on this plate yet.

Invent soil SBC or pick 230 × 450 vs 230 × 600. Put a column in the 8′ double-height opening or restore B5 as a post. Hang grid B on the porch beam. Put A5 at 75′ or in parking granite. Use 9″ house AAC, an SE pergola, a curved stair, or a 67′ envelope. Copy Plot 2110 rooms (2110 is graphic language only). Two cars abreast in parking. Send a 4 × 5 overlay back to Structure. Freeze drawing at 10′-11″. Claim 3D matches Rev L.

Treat this page and export/rev-l.json as two layers plus a warning: LOCKS (immutable) and CURRENT PLATE (Rev L snapshot of XY, 35 columns, rooms). Do not re-impose a 4 × 5 grid. Keep the locks. Do not freeze drawing at 10′-11″ — grow to ~12′-0″ × 17′-3″ (GMADA 13′ is the wish; 12′ is the lawful envelope). Kitchen stays ≥ 10′ E–W. Foyer 10′ held. Lounge toward 12′-4½″. Rev M recut is running on this same house; wait for the updated XY if you are about to move walls. Next work after that XY is 3D recut. 3D does not match this plate today.